24/7 Floor Finish

SKU# GJ0593 (Greer Janitorial specific SKU)


24/7® is a new, highly advanced floor finish with superior “off-the-mop” initial gloss. This ultra-high solids formula provides exceptional film clarity, repels soil and scratches, and extends the time between stripping cycles from 18 to 36 months. A wet-look gloss floor finish incorporating proprietary polymer technology producing outstanding long-term clarity, excellent abrasion resistance and extended durability. Excellent scrub and re-coat performance easily extends the time between stripping cycles from 18 to 36 months.

1 Gallon


Floor Preparation: Strip old finish and wax using your preferred NCL floor stripper following label directions. For baseboards and corners, use an NCL baseboard stripper following label directions. If necessary, rinse thoroughly with clean water and allow to completely dry.

Application: Using a clean mop or applicator apply a thin uniform coat of 24/7® Extended Performance Floor Finish. Allow to dry for a minimum of 30 minutes after each coat. Do not apply more than 4 coats in a 24 hour period. Floor should be thoroughly dry before traffic is allowed in area.

Buffing and Burnishing: 24/7® Extended Performance Floor Finish is an ideal product for use in no-buff or buffing programs using all speeds of buffing or burnishing machines. Prior to buffing or burnishing dust mop the floor surface using an NCL dust mop treatment. Buff or dry burnish using an NCL Aqua Magic™ buffing pad. For spray buffing, mop-on or autoscubber restoring use a preferred NCL gloss restorer.

Routine Maintenance: Dust mop using mop treated with an NCL dust mop treatment. Damp mop or clean with an automatic scrubber using your preferred NCL neutral floor cleaner following label directions.

Scrub and Recoat: When routine maintenance and buffing/burnishing no longer responds as needed, scrub and recoat using an NCL scrub and recoat cleaner following label directions.


  • Easy to Apply / Dries quickly, levels beautifully, no re-coat attack.
  • Ultra-High Solids / Save time and labor with fewer coats
  • Scuff, scratch and abrasion resistant / Minimizes maintenance requirements
  • Repels Dirt / Stays clean, clear and bright longer
  • Highest “Off-The-Mop” Gloss / Floors look beautiful, right from the start.
  • Excellent Burnish Response / Easily maintain wet-look gloss for extended period of time.
  • Exclusive Micro Molecular Technology / Superior durability, extremely consistent surface excel at long term performance.

Performs exceptionally well in the most demanding traffic environments in the busiest hallways of any size school.


24/7® holds up to the most intense retail traffic and also extends stripping cycles to reduce the frequency of salesfloor space restrictions and increase customer spending.


24/7® provides an ultra hard, wear durable film coating, tough enough to hold up in tough, heavy industry environments. The extended performance also prolongs periods between plant shutdowns for floor maintenance.


When operating budgets tighten up, 24/7® becomes a valuable component in the floor care lifecycle at governmental facilities. 24/7® is designed to extend the floor stripping cycle, saving budgets on manpower expenditures. When saving money on manpower, performance is not sacrificed, as 24-7® provides an ultra durable coating with a long lasting gloss.


The go-to floor finish for Building Service Contractors is 24/7®. The extension of the floor care life cycle enables contractors to maximize their labor without decreasing results for their customers. 24/7® protects better and shines longer than the industry standard, pleasing clients across multiple environments.